STM32CubeF3 firmware package overview

UM1766

13/29

DocID026352 Rev 8

STM32CubeF3 features a rich set of examples and applications at all levels making it easy

to understand and use any HAL driver and/or middleware components. These examples are

running on the STMicroelectronics boards listed in Table 2.

STM32CubeF3 supports Nucleo-32, Nucleo-64 and Nucleo-144 boards.

•

Nucleo-64 and Nucleo-144 boards support Adafruit LCD display Arduino™ UNO

shields which embed a microSD connector and a joystick in addition to the LCD.

•

Nucleo-32 boards support Gravitech 7-segment display Arduino™ NANO shields

which allow displaying up to four-digit numbers and characters.

The Arduino™ shield drivers are provided within the BSP component. Their usage is

illustrated by a demonstration firmware.

The STM32CubeF3 firmware can run on any compatible hardware. Simply update the BSP

drivers to port the provided examples on your board if its hardware features are the same

(e.g. LED, LCD display, buttons).

Table 2. Boards for STM32F3 Series

Board part number

STM32F3 devices supported

NUCLEO-F303RE

STM32F303RE

STM32303E-EVAL

STM32F303VE

32F3348DISCOVERY

STM32F334C8

NUCLEO-F334R8

STM32F334R8

NUCLEO-F302R8

STM32F302R8

STM32373C-EVAL

STM32F373VC

NUCLEO-F303K8

STM32F303K8

NUCLEO-F303ZE

STM32F303ZE

STM32F3DISCOVERY

STM32F303VC

STM32303C-EVAL

STM32F303VC