ST7MC1K2-Auto datasheet(369/371 Pages) STMICROELECTRONICS

369 / 371 page

Obsolete

Product(s)

- Obsolete

Product(s)

ST7MC1K2-Auto, ST7MC1K6-Auto, ST7MC2S4-Auto, ST7MC2S6-Auto

Revision history

369/371

Revision history

Table 233.

Document revision history

Date

Revision

Changes

12-Jul-2007

Rev 1

Initial release

Principal differences between initial release of ST7MCxxx-Auto

datasheet and ST7MCx, revision 11 dated 8 December 2006:

Changed document title on page 1

Changed root part numbers to ST7MC1K2-Auto, ST7MC1K6-Auto and

ST7MC2S4-Auto, ST7MC2S6-Auto throughout document

Removed all references to the SDIP32, LQFP80, and LQFP64

packages thoughout document

Updated all references to LQFP44 and LQFP32 packages

Updated memory and RAM throughout document to be specific to the

ST7MC1K2-Auto, ST7MC1K6-Auto and ST7MC2S4-Auto, ST7MC2S6-

Auto devices.

Updated temperatures ranges throughout document to include only

versions A and C

Removed all references relating to ‘standard and industrial’ from

document

Features on page 1: Changed number of I/0 ports from 60 to 34 and

updated information on I/O ports and analog peripherals

Table 1: Device summary on page 19: Updated

Added footnote to Table 2: Device pin description on page 23 indicating

that it is mandatory to connect all available VDD and VDDA pins to the

supply voltage and all VSS and VSSA pins to ground.

Output compare on page 111: Changed text of note 3 and removed

compare register i latch signal from Figure 49: Output compare timing

diagram, fTIMER =fCPU/4 on page 114

Section 13.2.4: Soldering information on page 355: Replaced

ECOPACKTM with ECOPACK®

Table 226 on page 356: Modified option byte 2

Table 229 on page 358: Modified table for automotive versions only

Added Section 15.3: TIMD set simultaneously with OC interrupt on

page 362 on the limitations of the 16-bit timer

Minor content differences between initial release of ST7MCxxx-Auto

datasheet and ST7MCx, revision 11 dated 8 December 2006:

Table 20: EICR register description on page 68: Updated ports to

include only those found on the LQFP32 and LQFP44 packages

SCI control register 1 (SCICR1) on page 171: Changed description of

bit 1 to reserved

Examples of LDIV coding on page 177: Modified example 3

Control register B (MCRB) on page 268 and Parity register (MPAR) on

page 285: Added footnote pertaining to pre-load bits

Table 209: General characteristics on page 329: Removed reference to

PD7

Table 220: 10-bit ADC characteristics on page 347: Amended

explanation of the parameter Ilkg

Obsolete

Product(s)

- Obsolete

Product(s)

ST7MC1K2-Auto 데이터시트(PDF) 369 Page - STMicroelectronics

ST7MC1K2-Auto 데이터시트(HTML) 369 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL