STM32F769AI datasheet(164/255 Pages) STMICROELECTRONICS

164 / 255 page

Electrical characteristics

STM32F765xx STM32F767xx STM32F768Ax STM32F769xx

164/255

DocID029041 Rev 4

Figure 38. FT I/O input characteristics

Output driving current

The GPIOs (general purpose input/outputs) can sink or source up to

±8 mA, and sink or

source up to

±20 mA (with a relaxed VOL/VOH) except PC13, PC14, PC15 and PI8 which

can sink or source up to

±3mA. When using the PC13 to PC15 and PI8 GPIOs in output

mode, the speed should not exceed 2 MHz with a maximum load of 30 pF.

In the user application, the number of I/O pins which can drive current must be limited to

respect the absolute maximum rating specified in Section 5.2. In particular:

•

The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run

consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating

ΣIVDD (see Table 15).

•

The sum of the currents sunk by all the I/Os on VSS plus the maximum Run

consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating

ΣIVSS (see Table 15).

Output voltage levels

Unless otherwise specified, the parameters given in Table 66 are derived from tests

performed under ambient temperature and VDD supply voltage conditions summarized in

Table 17. All I/Os are CMOS and TTL compliant.

STM32F769AI 데이터시트(PDF) 164 Page - STMicroelectronics