| 전자부품 데이터시트 검색엔진 |
|
STM32F769AI 데이터시트(PDF) 165 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32F769AI 데이터시트(HTML) 165 Page - STMicroelectronics |
|
165 / 255 page ![]() DocID029041 Rev 4 165/255 STM32F765xx STM32F767xx STM32F768Ax STM32F769xx Electrical characteristics 224 Input/output AC characteristics The definition and values of input/output AC characteristics are given in Figure 39 and Table 67, respectively. Table 66. Output voltage characteristics Symbol Parameter Conditions Min Max Unit VOL(1) 1. The IIO current sunk by the device must always respect the absolute maximum rating specified in Table 15. and the sum of IIO (I/O ports and control pins) must not exceed IVSS. Output low level voltage for an I/O pin CMOS port(2) IIO = +8 mA 2.7 V ≤ VDD ≤ 3.6 V 2. TTL and CMOS outputs are compatible with JEDEC standards JESD36 and JESD52. - 0.4 V VOH(3) 3. The IIO current sourced by the device must always respect the absolute maximum rating specified in Table 15 and the sum of IIO (I/O ports and control pins) must not exceed IVDD. Output high level voltage for an I/O pin except PC14 CMOS port(2) IIO = -8 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 0.4 - VOH(3) Output high level voltage for PC14 CMOS port(2) IIO = -2 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 0.4 VOL (1) Output low level voltage for an I/O pin TTL port(2) IIO =+8mA 2.7 V ≤ VDD ≤ 3.6 V - 0.4 V VOH (3) Output high level voltage for an I/O pin except PC14 TTL port(2) IIO =-8mA 2.7 V ≤ VDD ≤ 3.6 V 2.4 - VOL(1) Output low level voltage for an I/O pin IIO = +20 mA 2.7 V ≤ VDD ≤ 3.6 V - 1.3(4) 4. Based on characterization data. V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -20 mA 2.7 V ≤ VDD ≤ 3.6 V VDD 1.3(4) - VOL(1) Output low level voltage for an I/O pin IIO = +6 mA 1.8 V ≤ VDD ≤ 3.6 V - 0.4(4) V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -6 mA 1.8 V ≤ VDD ≤ 3.6 V VDD 0.4(4) - VOL(1) Output low level voltage for an I/O pin IIO = +4 mA 1.7 V ≤ VDD ≤ 3.6V - 0.4(5) 5. Guaranteed by design. V VOH(3) Output high level voltage for an I/O pin except PC14 IIO = -4 mA 1.7 V ≤ VDD ≤ 3.6V VDD 0.4(5) - VOH(3) Output high level voltage for PC14 IIO = -1 mA 1.7 V ≤ VDD ≤ 3.6V VDD 0.4(5) - |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |