PLQP0048KB-B datasheet(85/177 Pages) RENESAS

85 / 177 page

R01DS0261EJ0110 Rev.1.10

Page 85 of 177

Oct 30, 2015

RX230 Group, RX231 Group

5. Electrical Characteristics

Electrical Characteristics

5.1

Absolute Maximum Ratings

Caution: Permanent damage to the MCU may be caused if absolute maximum ratings are exceeded.

To preclude any malfunctions due to noise interference, insert capacitors with high frequency characteristics between the VCC

and VSS pins, between the AVCC0 and AVSS0 pins, between the VCC_USB and VSS_USB pins, between the VREFH0 and

VREFL0 pins, and between the VREFH and VREFL pins. Place capacitors of about 0.1

μF as close as possible to every power

supply pin and use the shortest and heaviest possible traces.

Connect the VCL pin to a VSS pin via a 4.7

μF capacitor. The capacitor must be placed close to the pin. For details, refer to

section 5.15.1, Connecting VCL Capacitor and Bypass Capacitors.

Do not input signals or an I/O pull-up power supply to ports other than 5-V tolerant ports while the device is not powered.

The current injection that results from input of such a signal or I/O pull-up may cause malfunction and the abnormal current that

passes in the device at this time may cause degradation of internal elements. Even if –0.3 to +6.5 V is input to 5-V tolerant ports,

it will not cause problems such as damage to the MCU.

Note 1. Ports 12, 13, 16, 17, 30, 31, 32, and B5 are 5 V tolerant.

Note 2. The upper limit of operating temperature is 85°C or 105°C, depending on the product. For details, refer to section 1.2, List of

Products.

Table 5.1

Absolute Maximum Ratings

Conditions: VSS = AVSS0 = VREFL0 = VREFL= VSS_USB = 0 V

Item

Symbol

Value

Unit

Power supply voltage

VCC, VCC_USB

–0.3 to +6.5

VBATT power supply voltage

Vbatt

–0.3 to +6.5

Input voltage

Ports for 5 V tolerant*1

Vin

–0.3 to +6.5

P03, P05, P40 to P47

–0.3 to AVCC0 +0.3

Ports other than above

–0.3 to VCC +0.3

Reference power supply voltage

VREFH0

–0.3 to AVCC0 +0.3

VREFH

Analog power supply voltage

AVCC0

–0.3 to +6.5

Analog input

voltage

When AN000 to AN007 are used

VAN

–0.3 to AVCC0 +0.3

When AN016 to AN031 are used

–0.3 to VCC +0.3

Operating temperature*2

Topr

–40 to +85

–40 to +105

°C

Storage temperature

Tstg

–55 to +125

°C

PLQP0048KB-B 데이터시트(PDF) 85 Page - Renesas Technology Corp

PLQP0048KB-B 데이터시트(HTML) 85 Page - Renesas Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL