PT6880 datasheet(39/42 Pages) PTC

39 / 42 page

Tel : 886-2-29162151

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

OLED Driver/Controller IC

Preliminary

PT6880

Symbol

Min.

Nom.

Max

0.11

0.23

0.73

0.88

1.03

1.60 BSC

3.40

0.25

0.50

2.50

2.70

2.90

0.22

0.40

23.20 BASIC

20.00 BASIC

17.20 BASIC

14.00 BASIC

0.65 BASIC

0.2

0.13

0.30

θ1

θ2

16o

θ3

16o

Notes:

1. All dimensioning and tolerancing dimension conform to ASME Y14.5M-19942.

2. Dimensions “D1” and “E1” do not include mold protrusion, allowable protrusion is 0.25 mm per

side.

3. Regardless of the relative size of the upper and lower body sections, dimensions “D1” and “E1” are

determined at the largest feature of the body exclusive of mold flash and gate burrs but including

any mismatch between the upper and lower sections of the molded body.

4. Controlling Dimensions: Millimeters

5. Dimension “b” do not include dambar protrusion. The dambar protrusion(s) shall not cause the

lead

width to exceed “B” maximum by more than 0.08 mm. Dambar cannot be located on the lower

radius or the lead foot.

6. Refer to JEDEC MS-022 Variation GC-1

JEDEC is the trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.

PT6880 pre 1.1

Page 39

Mar. 2002

PT6880 데이터시트(PDF) 39 Page - Princeton Technology Corp

PT6880 데이터시트(HTML) 39 Page - Princeton Technology Corp

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42

데이터시트 다운로드

링크 URL