SN65MLVD201, SN65MLVD203

SN65MLVD206, SN65MLVD207

SLLS558A – DECEMBER 2002 – JUNE 2003

www.ti.com

2

Thesedevices have limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during

storage or handling to prevent electrostatic damage to the MOS gates.

ORDERING INFORMATION

PART NUMBER

FOOTPRINT

RECEIVER TYPE

PACKAGE MARKING

SN65MLVD201D

SN75176

Type 1

MF201

SM65MLVD203D

SN75ALS180

Type 1

MLVD203

SN65MLVD206D

SN75176

Type 2

MF206

SM65MLVD207D

SN75ALS180

Type 2

MLVD207

PACKAGE DISSIPATION RATINGS

PACKAGE

TA ≤ 25°C

POWER RATING

DERATING FACTOR

ABOVE TA = 25°C

TA = 85°C

POWER RATING

D(8)

725 mW

5.8 mW/

_C

377 mW

D(14)

950 mW

7.6 mW/

_C

494 mw

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range unless otherwise noted(1)

SN65MLVD201, 203, 206, AND

207

Supply voltage range(2), VCC

–0.5 V to 4 V

D, DE, RE

–0.5 V to 4 V

Input voltage range

A, B (201, 206)

–1.8 V to 4 V

In ut voltage range

A, B (203, 207)

–4 V to 6 V

Ot

t

lt

R

–0.3 V to 4 V

Output voltage range

Y, Z, A, or B

–1.8 V to 4 V

H

B d Mdl(3)

A, B, Y, and Z

±8 kV

Electrostatic discharge

Human Body Model(3)

All pins

±2 kV

Electrostatic discharge

Charged-DeviceModel(4)

All pins

±1500 V

Continuous power dissipation

See Dissipation Rating Table

Storage temperature range

–65

°C to 150°C

(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and

functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not

implied.Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2) All voltage values, except differential I/O bus voltages, are with respect to network ground terminal.

(3) Tested in accordance with JEDEC Standard 22, Test Method A114–A.

(4) Tested in accordance with JEDEC Standard 22, Test Method C101.

RECOMMENDED OPERATING CONDITIONS

MIN

NOM

MAX

UNIT

Supply voltage, VCC

3

3.3

3.6

V

High-level input voltage, VIH

2

VCC

V

Low-level input voltage, VIL

GND

0.8

V

Voltage at any bus terminal VA, VB, VY or VZ

–1.4

3.8

V

Magnitude of differential input voltage,

VID

0.05

VCC

V

Operating free-air temperature, TA

–40

85

°C