Series KP

Miniature Audio/Video Pushbuttons

D46

D

www.nkkswitches.com

ASSEMBLY INSTRUCTIONS FOR SQUARE CAPS

As shown in the accompanying illustration, the cap and

plunger are designed with tabs and notches to assure proper

orientation of the cap on the switch.

Holding the switch tightly, pull the cap off the switch. Once the

cap assembly is released from the plunger, the lens and diffuser can

be separated.

Pry up the lens with fingernail or flat tip screwdriver inserted at

the step on the diffuser.

After aligning notches with tabs, join the lens and diffuser.

Hold the switch tightly without touching the terminals. Firmly

press the cap onto the plunger by applying pressure from one

side to the other until both are snapped together.

Cap Orientation

Notch

Tab

Step

Plunger

Notches

Cap

Assembly

Plunger

Switch

ATTENTION

ELECTROSTATIC

SENSITIVE DEVICES

Removal of Cap Assembly & Separation of Lens & Diffuser

Installation or Replacement of Cap