PCMP384D25 datasheet(19/26 Pages) WPI

19 / 26 page

Pilkor components

Metallized Polypropylene

PCMP 384

film capacitors

203

MOUNTING

NORMAL USE

The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers

are designed for mounting on printed-circuit boards by means of automatic insertion machines.

SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATIONAND SHOCK

. For pitches of 15 mm the capacitors shall be mechanically fixed by the leads

. For larger pitches the capacitors shall be mounted in the same way and the body clamped.

SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD

The maximum length and width of film capacitors are shown in the following drawing ;

- Eccentricity as in drawing.

The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned.

- Product height with seating plane as given by IEC 60717 as reference : hmax ≤ h+0.3mm

STORAGE TEMPERATURE

. Storage temperature : Tstg = -25 to +40

oC with RH maximum 80% without condensation.

Eccentricity

Imax = I +0.3 mm

b max = b + 0.3mm

PCMP384D25 데이터시트(PDF) 19 Page - World Produts Inc.