* All specifications are subject to change without notice.

Designed for Rugged Excellence

Introduction

Features



High Speed Air Connectivity: WLAN interface support up to

300Mbps link speed



Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/

WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported



Support X-Roaming < 60 ms



Support wireless load balance



Support MAC Filter



Support Long Distance Air Connectivity



Provide Digital Input and Digital Output



Support AP/Bridge/Repeater/AP-Client Mode



Support Multiple-SSID to 4 SSID



Switch Mode Supported: Daisy Chain support to reduce usage of

switch ports



Dual redundant Ethernet port support redundant mode



Wireless connecting status monitoring



Secured Management by HTTPS



Event Warning by Syslog, Email, SNMP Trap, Relay and Beeper



Rigid IP-30 housing design



DIN-Rail and Wall-mount enabled

IGAP-420 series is a reliable WLAN Access Point with 2 Ethernet Gigabit ports and IEEE 802.11 b/g/n wireless module.

It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IGAP-420 / IGAP-420+

by WEB interface via LAN port or WLAN interface. IGAP-420 series provides dual Ethernet ports in switch mode, so that

you can use Daisy Chain to reduce the usage of Ethernet switch ports. In addition, IGAP-420+ also provides P.D. feature

on ETH2 port which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IGAP-420 series is one of the

best communication solutions for wireless applications on the industrial network.

IGAP-420 / IGAP-420+

Industrial IEEE 802.11 b/g/n wireless access

point with 2x10/100/1000Base-T(X)