Note 1: All voltages are measured with respect to the GND pin unless otherwise specified.

Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

functional, but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions which

guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters where no limit

is given, however, the typical value is a good indication of device performance.

Note 4: Human body model, 100pF discharged through a 1.5k

Ω resistor.

Note 5: Machine model, 220pF – 240pF discharged through all pins.

Note 6: Typicals are measured at 25˚C and represent the parametric norm.

Note 7: Limits are guaranteed to National’s AOQL (Average Outgoing Quality Level).

Note 8: Datasheets min/max specification limits are guaranteed by design, test, or statistical analysis.

Note 9: Shutdown current is measured in a normal room environment. The SHUTDOWN pin should be driven as close as possible to GND for minimum shutdown

current.

Note 10: Please refer to “Under Voltage Protection” on page 8 under “General Features.”

Typical Performance Characteristics

THD+N vs Frequency

V

Ω,P

THD+N vs Frequency

V

Ω,P

20095806

20095807

THD+N vs Frequency

V

Ω,P

THD+N vs Output Power

R

Ω,V

20095808

20095809

www.national.com

4