V850ESLASHME2 datasheet(35/226 Pages) NEC

35 / 226 page

CHAPTER 3 DATA TYPES

User’s Manual U14559EJ3V1UM

3.2 Data Representation

3.2.1 Integer

An integer is expressed as a binary number of 2’s complement and is 32, 16, or 8 bits long. Regardless of its

length, bit 0 of an integer is the least significant bit. The higher the bit number, the more significant the bit. Because

2’s complement is used, the most significant bit is used as a sign bit.

The integer range of each data length is as follows.

• Word (32 bits):

–2,147,483,648 to +2,147,483,647

• Halfword (16 bits):

–32,768 to +32,767

• Byte (8 bits):

–128 to +127

3.2.2 Unsigned integer

While an integer is data that can take either a positive or a negative value, an unsigned integer is an integer that is

not negative. Like an integer, an unsigned integer is also expressed as 2’s complement and is 32, 16, or 8 bits long.

Regardless of its length, bit 0 of an unsigned integer is the least significant bit, and the higher the bit number, the more

significant the bit. However, no sign bit is used.

The unsigned integer range of each data length is as follows.

• Word (32 bits):

0 to 4,294,967,295

• Halfword (16 bits):

0 to 65,535

• Byte (8 bits):

0 to 255

3.2.3 Bit

1-bit data that can take a value of 0 (cleared) or 1 (set) can be handled as bit data. Bit manipulation can be

performed only on 1-byte data in the memory space in the following four ways.

• SET1

• CLR1

• NOT1

• TST1

V850E/ME2 데이터시트(PDF) 35 Page - NEC