Description
The LCS10T12 connected to the LPM12 or LPMG12 indicator
is a low cost, easy to use, go/no-go indication system for the
remote monitoring of current flow. The LCS10T12 is installed
on an adequately insulated wire of the monitored load. Its 12in.
(30.4cm) leads are connected to the LPM12 or LPMG12 panel
mount indicator directly or via customer supplied wires up to 500
feet (152.4m) long.
Operation
When the monitored current is 5A turns, the panel mount LPM
indicator will glow. The LCS10T12 is designed to maximize the
light output of the panel mount indicator. It can be used to
monitor current flow of less than 5A by passing the monitored
conductor 2 or more times through the sensor.
CAUTION: The LCS10T12 must be connected to the LPM12
or LPMG12 before current flows to prevent damage or a shock
hazard. Monitored wires must be properly insulated.
Panel mount indicator designed to match the output of the
LCS10T12. The LPM12 and LPMG12 come with 12 in. (30.4 cm)
wires and a one piece mounting clip. Both devices install quickly
in a 0.25 in. (6.35 mm) hole in panels from 0.031 - 0.062 in.
(0.79 - 1.6 mm) thick.

Features
JJ Low cost go/no go indication
JJ May be connected to wires up to 500 feet (152.4 m) long
JJ Remote monitoring of currents up to 50A
JJ Green or red LED indicator available