|
Features ■ 4 bit microcontroller for digital tuning systems. ■ Operating voltage VDD = 1.8~3.6 V, with low current consumption because of CMOS circuitry (with only CPU operating, when VDD = 3 V, IDD = 80 µA max) ■ Built-in prescaler (1/2 fixed divider +2 modulus prescaler: ■ fmax ≥ 230 MHz) ■ Features built-in 1/3-duty, 1/2-bias LCD drivers and a built-in 3 V booster circuit for the display. ■ Data memory (RAM) and ports are easily backed up. ■ Program memory (ROM): 16 bit × 4096 steps ■ Data memory (RAM): 4 bit × 256 words ■ 60-instruction set (all one-word instructions) ■ Instruction execution time: 40 µs (with 75 kHz crystal) (MVGS, DAL instructions: 80 µs) ■ Many addition and subtraction instructions (12 types addition, 12 types subtraction) ■ Powerful composite judging instructions (TMTR, TMFR, TMT, TMF, TMTN, TMFN) ■ Data can be transmitted between addresses on the same row. (MVSR instruction) ■ Register indirect transfer available (MVGD, MVGS instruction). ■ 16 powerful general registers (located in RAM) ■ Stack levels: 2 ■ JUMP or CAL instruction can be used anywhere in the 4096 steps of program memory (ROM) as there are no pages or fields. ■ 16 bit of any address in the 1024 steps in program memory (ROM) can be referenced (DAL instruction). ■ Features independent frequency input pins (FMIN and AMIN) and two (DO1 and DO2) phase comparison outputs for FM/VHF and AM. ■ Seven reference frequencies can be selected by program. ■ Powerful input/output instructions (IN 1, 2, OUT 1, 2) ■ Dedicated input ports (K0~K3) for key input. 26 LCD drive pins (69 segments maximum) available. ■ 17 I/O ports: 10 with input/output programmable in 1 bit units, and 7 output-only port. The 2 IFIN, and DO1 pins can be switched by instruction to IN (input-only) or OT (output-only). ■ Three back-up modes available by instruction: Only CPU operation, crystal oscillation only, clock stop. TC9318AFAG TC9318AFBG Weight P-LQFP64-1010-0.50E: 0.32 g (typ.) P-LQFP64-1212-0.65A: 0.45 g (typ.)
|