 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ISM330DLC 데이터시트(PDF) 52 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
ISM330DLC 데이터시트(HTML) 52 Page - STMicroelectronics |
|
|
52 / 116 page  Auxiliary SPI configurations ISM330DLC 52/116 DocID030686 Rev 2 8.2 Accelerometer filtering Accelerometer filtering is available only when Mode 4 is enabled. Figure 22. Accelerometer chain (available only in Mode 4) Accelerometer output values are in registers OUTX_L_XL (28h) through OUTZ_H_XL (2Dh) and ODR at 6.66 kHz. 8.2.1 Accelerometer full scale set from primary interface If the SPI/I2C primary interface is used, the full-scale setting has been configured by the primary interface and CTRL3_OIS (72h) must be set to the same full-scale setting of the primary interface. 8.2.2 Accelerometer full scale set from auxiliary SPI If the configuration uses only the auxiliary SPI, the full scale can be set using the FS[1:0]_XL_OIS bits in CTRL3_OIS (72h). The configuration of the low-pass filter depends on the setting of the FILTER_XL_CONF_OIS[1:0] bits in register CTRL3_OIS (72h). |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
