전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

5238-DS03-405-R 데이터시트(PDF) 14 Page - Broadcom Corporation.

부품명 5238-DS03-405-R
상세설명  10/100BASE-TX Octal Transceiver
PDF  76 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  BOARDCOM [Broadcom Corporation.]
홈페이지  http://www.broadcom.com
Logo BOARDCOM - Broadcom Corporation.

5238-DS03-405-R 데이터시트(HTML) 14 Page - Broadcom Corporation.

Back Button 5238-DS03-405-R Datasheet HTML 10Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 11Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 12Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 13Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 14Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 15Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 16Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 17Page - Broadcom Corporation. 5238-DS03-405-R Datasheet HTML 18Page - Broadcom Corporation. Next Button
Zoom Inzoom in Zoom Outzoom out
 14 / 76 page
background image
BCM5238
Advance Data Sheet
1/31/03
Broa d c om Co rp o r a t i o n
Page 6
Source Synchronous SMII (SSSMII) Interface
Document
5238-DS03-405-R
INTERRUPT MODE
The BCM5238 can be programmed to provide an interrupt output consisting of an OR of the eight interrupts, one from each
PHY. The interrupt feature is disabled by default. The interrupt capability is enabled by setting MII register 1Ah, bit 14. The
status of each interrupt source is also reflected in register 1Ah, bits 1, 2 and 3. The sources of interrupt are change in link,
speed or full-duplex status. If any type of interrupt occurs, the Interrupt Status bit, register 1Ah, bit 0 is set.
In addition, each transceiver has its own register controlling the interrupt function.
If the interrupt enable bit is set to 0, no status bits sets and no interrupts are generated. If the interrupt enable bit is set to 1,
the following conditions apply:
•
If mask status bits are set to 0 and the interrupt mask is set to 1, status bits are set, but no interrupts are generated.
•
If mask status bits are set to 0 and the interrupt mask is set to 0, status bits and interrupts are available.
•
If mask status bits are set to 1 and the interrupt mask is set to 0, no status bits and no interrupts are available.
Changes from active to inactive, or vice versa, cause an interrupt. Setting register 1Ah, bit 8 high masks all interrupts,
regardless of the settings of the individual mask bits.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com