| 전자부품 데이터시트 검색엔진 |
|
28F032B3 데이터시트(PDF) 23 Page - Intel Corporation |
|
|
|||||||||||||||||||||||||||||
28F032B3 데이터시트(HTML) 23 Page - Intel Corporation |
|
23 / 48 page ![]() E SMART 3 ADVANCED BOOT BLOCK 23 PRELIMINARY 4.0 ELECTRICAL SPECIFICATIONS 4.1 Absolute Maximum Ratings* Extended Operating Temperature During Read .......................... –40 °C to +85 °C During Block Erase and Program.......................... –40 °C to +85 °C Temperature Under Bias ....... –40 °C to +85 °C Storage Temperature................. –65 °C to +125 °C Voltage on Any Pin (except VCC, VCCQ and VPP) with Respect to GND ............. –0.5 V to 3.7 V(1) VPP Voltage (for Block Erase and Program) with Respect to GND ..... –0.5 V to +13.5 V(1,2,4) VCC and VCCQ Supply Voltage with Respect to GND ........... –0.2 V to +3.7 V(5) Output Short Circuit Current.....................100 mA(3) NOTICE: This datasheet contains preliminary information on new products in production. Do not finalize a design with this information. Revised information will be published when the product is available. Verify with your local Intel Sales office that you have the latest datasheet before finalizing a design. * WARNING: Stressing the device beyond the "Absolute Maximum Ratings" may cause permanent damage. These are stress ratings only. Operation beyond the "Operating Conditions" is not recommended and extended exposure beyond the "Operating Conditions" may effect device reliability. NOTES: 1. Minimum DC voltage is –0.5 V on input/output pins, with allowable undershoot to –2.0 V for periods < 20 ns. Maximum DC voltage on input/output pins is V CC + 0.5 V, with allowable overshoot to VCC + 1.5 V for periods < 20 ns. 2. Maximum DC voltage on V PP may overshoot to +14.0 V for periods < 20 ns. 3. Output shorted for no more than one second. No more than one output shorted at a time. 4. VPP Program voltage is normally 2.7 V–3.6 V. 5. Minimum DC voltage is –0.5 V on VCC and VCCQ, with allowable undershoot to –2.0 V for periods < 20 ns. Maximum DC voltage on VCC and VCCQ pins is VCC + 0.5 V, with allowable overshoot to VCC + 1.5 V for periods < 20 ns. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |