ADC12L080 datasheet(3/23 Pages) NSC

3 / 23 page

Pin Descriptions and Equivalent Circuits

Pin No.

Symbol

Equivalent Circuit

Description

ANALOG I/O

IN+

Differential analog signal Input pins. With a 1.0V reference

voltage the full-scale differential input signal level is 2.0 V

P-P

with each input pin centered on a common mode voltage,

CM. The VIN- pin may be connected to VCM for single-ended

operation, but a differential input signal is required for best

performance.

IN−

REF

Reference input. This pin should be connected to V

A to use

the internal 1.0V reference. If it is desired to use an external

reference voltage, this pin should be bypassed to AGND with

a 0.1 µF low ESL capacitor. Specified operation is with a

REF of 1.0V, but the device will function well with a VREF

range indicated in the Electrical Tables.

These pins are high impedance reference bypass pins only.

Connect a 0.1 µF capacitor from each of these pins to AGND.

Connect a 1.0 µF capacitor from V

RP to VRN. DO NOT LOAD

these pins.

DIGITAL I/O

CLK

Digital clock input. The range of frequencies for this input is

10 MHz to 80 MHz with guaranteed performance at 80 MHz.

The input is sampled on the rising edge of this input.

Output format selection. When this pin is LOW, the output

format is offset binary. When this pin is HIGH the output

format is two’s complement. This pin may be changed

asynchronously, but such a change will result in errors for one

or two conversions.

8PD

PD is the Power Down input pin. When high, this input puts

the converter into the power down mode. When this pin is

low, the converter is in the active mode.

ADC12L080 데이터시트(PDF) 3 Page - National Semiconductor (TI)

ADC12L080 데이터시트(HTML) 3 Page - National Semiconductor (TI)

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23

데이터시트 다운로드

링크 URL