TLS115D0LD datasheet(19/26 Pages) INFINEON

19 / 26 page

TLS115D0

High Precision Voltage Tracker

Block description and electrical characteristics

Data Sheet

Rev. 1.00

2016-10-13

4.9

Power Good output

The Power Good output PG indicates an overvoltage or undervoltage condition of the tracker output. For this

the TLS115D0 compares the output voltage VOUT to the reference voltage VADJ. Variations of the output voltage

beyond the Power Good switching thresholds are indicated by a “low” signal at the Power Good output PG.

Transients shorter than the Power Good reaction time tPG,r do not trigger the Power Good output.

The Power Good output PG is an open collector output that requires a pull-up resisitor to a positive voltage

rail. The pull-up voltage must not exceed the absolute maximum ratings of Power Good PG (see “Absolute

maximum ratings” on Page 7).

Table 9

Electrical characteristics Power Good output

VIN = 13.5 V, 2.0 V ≤ VADJ ≤ 14 V, VEN ≥ 2.0 V, Tj = -40°C to +150°C, all voltages with respect to ground, positive

current flowing into pin (unless otherwise specified).

Parameter

Symbol

Values

Unit Note or

Test Condition

Number

Min.

Typ.

Max.

Power Good switching

threshold, undervoltage

VOUT,UV

VADJ -

120

VADJ -

VOUT decreasing,

VIN ≥ VADJ + 150 mV

P_4.9.1

Power Good switching

threshold, overvoltage

VOUT,OV

VADJ +

120

VOUT increasing,

VIN ≥ VADJ + 150 mV

P_4.9.2

Power Good reaction time

tPG,r

µs

–

P_4.9.3

Power Good output low

voltage

VPG,low

–0.2

0.4

VIN ≥ 4V,

IPG,ext ≤ 1.8 mA

P_4.9.4

Power Good output

external input current

IPG,ext

––

1.8

VPG ≤ 0.4 V

P_4.9.5

Power Good output

leakage current

IPG,leak

–0

µA

VOUT = VADJ,

VPG = 5 V

P_4.9.6

TLS115D0LD 데이터시트(PDF) 19 Page - Infineon Technologies AG

TLS115D0LD 데이터시트(HTML) 19 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26

데이터시트 다운로드

링크 URL