P89LPC907FD datasheet(8/51 Pages) PHILIPS

8 / 51 page

Philips Semiconductors

P89LPC906/907/908

8-bit microcontrollers with two-clock 80C51 core

Product data

Rev. 05 — 17 December 2004

8 of 51

9397 750 14467

5.2 Pin description

Table 3:

P89LPC906 pin description

Symbol

Type

Description

P0.4 to P0.6

I/O

Port 0: Port 0 is an I/O port with a user-conﬁgurable output types. During reset Port 0

latches are conﬁgured in the input only mode with the internal pull-up disabled. The

operation of Port 0 pins as inputs and outputs depends upon the port conﬁguration

selected. Each port pin is conﬁgured independently. Refer to Section 8.11.1 “Port

conﬁgurations” and Table 13 “DC electrical characteristics” for details.

The Keypad Interrupt feature operates with Port 0 pins.

All pins have Schmitt triggered inputs.

Port 0 also provides various special functions as described below:

I/O

P0.4 — Port 0 bit 4.

CIN1A — Comparator positive input.

KBI4 — Keyboard input 4.

I/O

P0.5 — Port 0 bit 5.

CMPREF — Comparator reference (negative) input.

KBI5 — Keyboard input 5.

I/O

P0.6 — Port 0 bit 6.

CMP1 — Comparator 1 output.

KBI6 — Keyboard input 6.

P1.5

P1.5 — Port 1 bit 5 (input only).

RST — External Reset input during Power-on or if selected via UCFG1. When

functioning as a reset input a LOW on this pin resets the microcontroller, causing I/O

ports and peripherals to take on their default states, and the processor begins

execution at address 0. Also used during a power-on sequence to force In-System

Programming mode. When using an oscillator frequency above 12 MHz, the

reset input function of P1.5 must be enabled. An external circuit is required to

hold the device in reset at power-up until VDD has reached its speciﬁed level.

When system power is removed VDD will fall below the minimum speciﬁed

operating voltage. When using an oscillator frequency above 12 MHz, in some

applications, an external brownout detect circuit may be required to hold the

device in reset when VDD falls below the minimum speciﬁed operating voltage.

P89LPC907FD 데이터시트(PDF) 8 Page - NXP Semiconductors

P89LPC907FD 데이터시트(HTML) 8 Page - NXP Semiconductors

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51

데이터시트 다운로드

링크 URL