CS42516 datasheet(46/90 Pages) CIRRUS

46 / 90 page

DS583F1

CS42516

6. REGISTER DESCRIPTION

All registers are read/write except for the I.D. and Revision Register, OMCK/PLL_CLK Ratio Register, Interrupt Sta-

tus Register, and Q-Channel Subcode Bytes and C-bit or U-bit Data Buffer, which are read only. See the following

bit definition tables for bit assignment information. The default state of each bit after a power-up sequence or reset

is listed in each bit description.

6.1

Memory Address Pointer (MAP)

Not a register

6.1.1

INCREMENT (INCR)

Default = 1

Function:

Memory Address Pointer auto increment control

0 -

MAP is not incremented automatically.

1 -

Internal MAP is automatically incremented after each read or write.

6.1.2

MEMORY ADDRESS POINTER (MAPX)

Default = 0000001

Function:

Memory Address Pointer (MAP). Sets the register address that will be read or written by the control

port.

6.2

Chip I.D. and Revision Register (address 01h) (Read Only)

6.2.1

CHIP I.D. (CHIP_IDX)

Default = 1110

Function:

I.D. code for the CS42516. Permanently set to 1110.

6.2.2

CHIP REVISION (REV_IDX)

Default = xxxx

Function:

CS42516 revision level.

Revision D is coded as 0100.

Revision C is coded as 0011.

543

INCR

MAP6

MAP5

MAP4

MAP3

MAP2

MAP1

MAP0

543

Chip_ID3

Chip_ID2

Chip_ID1

CHIP_ID0

Rev_ID3

Rev_ID2

Rev_ID1

Rev_ID0

CS42516 데이터시트(PDF) 46 Page - Cirrus Logic

CS42516 데이터시트(HTML) 46 Page - Cirrus Logic

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90

데이터시트 다운로드

링크 URL