 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
RM0016 데이터시트(PDF) 71 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
RM0016 데이터시트(HTML) 71 Page - STMicroelectronics |
|
|
71 / 467 page  DocID14587 Rev 14 71/467 RM0016 Interrupt controller (ITC) 72 6.9.4 External interrupt control register 1 (EXTI_CR2) Address offset: 0x01 Reset value: 0x00 7 654 3210 Reserved TLIS PEIS[1:0] rrw rw Bits 7:3 Reserved. Bit 2 TLIS: Top level interrupt sensitivity This bit is set and cleared by software. This bit can be written only when external interrupt is disabled on the corresponding GPIO port (PD7 or PC3, refer to Section 6.6: External interrupts on page 66). 0: Falling edge 1: Rising edge Bits 1:0 PEIS[1:0]: Port E external interrupt sensitivity bits These bits can only be written when I1 and I0 in the CCR register are both set to 1 (level 3). They define the sensitivity of the Port E external interrupts. 00: Falling edge and low level 01: Rising edge only 10: Falling edge only 11: Rising and falling edge |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
