 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
VSC7440 데이터시트(PDF) 259 Page - Microsemi Corporation |
|
|
|||||||||||||||||||||||||||||
VSC7440 데이터시트(HTML) 259 Page - Microsemi Corporation |
|
|
259 / 444 page  Functional Descriptions VMDS-10492 VSC7440 Datasheet Revision 4.2 242 The following TTI parameters can be used as part of the TUPE criteria: • PORT_NUM • QU_NUM • TUPE_CTRL The parameters prefixed "CMD" specify the commands, which are applied to any TTIs, which fulfill the TUPE criteria. Using the TUPE command parameters, the following TTI parameters can be changed: •TIMER_ENA Timers can be enabled/disabled. • PORT_NUM Injections can be moved to a different port. • QU_NUM Injections can be moved to a different queue. While TUPE is running no injections will be performed for any TTIs which match the configured TUPE criteria and fall within the configured TUPE address range. The TUPE_CTRL field in the TTI Table can be used to classify TTIs into different groups, such that a TUPE command can easily address all TTIs within such group. The following illustration depics the AFI TUPE functionality. TUPE_MISC CRIT_QU_NUM_ENA Enable use of CRIT_QU_NUM_VAL. 1 TUPE_MISC CMD_TIMER_ENA_ENA Enable use of CMD_TIMER_ENA_VAL. 1 TUPE_MISC CMD_TIMER_ENA_VAL TUPE command parameter: New TIMER_ENA value. 1 TUPE_MISC CMD_PORT_NUM_ENA Enable use of CMD_PORT_NUM_VAL. 1 TUPE_MISC CMD_QU_NUM_ENA Enable use of CMD_QU_NUM_VAL. 1 TUPE_ADDR TUPE_START_ADDR First address in TTI table for AFI TUPE to process. 1 TUPE_ADDR TUPE_END_ADDR Last address in TTI table for AFI TUPE to process. 1 TUPE_CRIT1 CRIT_PORT_NUM_VAL TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT1 CRIT_QU_NUM_VAL TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT2 CRIT_TUPE_CTRL_MASK TUPE criteria parameter controlling which TTI table entries to update. 1 TUPE_CRIT3 CRIT_TUPE_CTRL_VAL TUPE criteria parameter controlling which TTI table entries to update. 2 TUPE_CMD1 CMD_PORT_NUM_VAL TUPE command parameter: New PORT_NUM value. 1 TUPE_CMD1 CMD_QU_NUM _VAL TUPE command parameter: New QU_NUM value. 1 Table 168 • AFI TUPE Registers Overview (continued) AFI:TUPE Register Field Description Replication |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
