전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

IIS2MDCTR 데이터시트(PDF) 17 Page - STMicroelectronics

부품명 IIS2MDCTR
상세설명  High-accuracy, ultra-low-power, 3-axis digital output magnetometer
PDF  40 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  STMICROELECTRONICS [STMicroelectronics]
홈페이지  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

IIS2MDCTR 데이터시트(HTML) 17 Page - STMicroelectronics

Back Button IIS2MDCTR Datasheet HTML 13Page - STMicroelectronics IIS2MDCTR Datasheet HTML 14Page - STMicroelectronics IIS2MDCTR Datasheet HTML 15Page - STMicroelectronics IIS2MDCTR Datasheet HTML 16Page - STMicroelectronics IIS2MDCTR Datasheet HTML 17Page - STMicroelectronics IIS2MDCTR Datasheet HTML 18Page - STMicroelectronics IIS2MDCTR Datasheet HTML 19Page - STMicroelectronics IIS2MDCTR Datasheet HTML 20Page - STMicroelectronics IIS2MDCTR Datasheet HTML 21Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 17 / 40 page
background image
DocID030986 Rev 1
17/40
IIS2MDC
Functionality
40
The following table summarizes the turn-on time of the device in the two different power
modes with the offset cancellation function enabled or disabled (see Section : Where
Current_consumption_in_power_down and Current_consumption_10Hz can be found,
respectively, in Table 5 and Table 11.).
The IIS2MDC offers single measurement mode in both high-resolution and low-power
modes.
Single measurement mode is enabled by writing bits MD[1:0] to '01' in CFG_REG_A (60h).
In single measurement mode, once the measurement has been performed, the DRDY pin is
set to high, data is available in the output register and the IIS2MDC is automatically
configured in idle mode by setting the MD[1] bit to '1'.
Single measurement is independent of the programmed ODR but depends on the frequency
at which the MD[1:0] bits are written by the microcontroller/application processor.
Maximum ODR frequency achievable in single mode measurement is given in the following
table.
In single measurement mode, for ODR < 10 Hz, current consumption can be calculated with
the following formula:
(Current_consumption_10Hz - Current_consumption_in_power_down) / (10 Hz / ODR) +
Current_consumption_in_power_down
Where Current_consumption_in_power_down and Current_consumption_10Hz can be
found, respectively, in Table 5 and Table 11.
Table 12. Operating mode and turn-on time
Operating mode
Turn-on time
CFG_REG_A[LP]
CFG_REG_A[OFF_CANC = 0]
CFG_REG_A[OFF_CANC = 1]
0 (high-resolution)
9.4 ms
9.4 ms + 1/ODR
1 (low-power)
6.4 ms
6.4 ms + 1/ODR
Table 13. Maximum ODR in single measurement mode (HR and LP modes)
Maximum ODR
Power mode (CFG_REG_A[LP])
100 Hz
High resolution (LP = ‘0’)
150 Hz
Low power (LP = ‘1’)



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com