 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
X11SSL 데이터시트(PDF) 28 Page - List of Unclassifed Manufacturers |
|
|
|||||||||||||||||||||||||||||
X11SSL 데이터시트(HTML) 28 Page - List of Unclassifed Manufacturers |
|
|
28 / 124 page  28 X11SSM(-F)/X11SSL(-F) User Manual Thermal Grease Heatsink Fins Installing an Active CPU Heatsink with Fan 1. Locate the CPU fan power connector on the motherboard. (Refer to the layout on the right for the CPU fan location.) 2. Position the heatsink so that the heatsink fan wires are closest to the CPU fan power connector and are not interfering with other components. 3. Inspect the CPU fan wires to make sure that the wires are routed through the bottom of the heatsink. 4. Remove the thin layer of protective film from the heatsink. Important: CPU overheating may oc- cur if the protective film is not removed from the heatsink. 5. Apply the proper amount of thermal grease on the CPU. Note: If your heatsink came with a ther- mal pad, please ignore this step. 6. If necessary, rearrange the wires to make sure that the wires are not pinched between the heatsink and the CPU. Also make sure to keep clearance between the fan wires and the fins of the heatsink. Recommended Supermicro heatsink: SNK-P0046A4 or SNK-P0051AP4 active heatsink (2U+ or 4U chassis) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
