X11SSL datasheet(70/124 Pages) ETC1

70 / 124 page

X11SSM(-F)/X11SSL(-F) User Manual

3.3 Frequently Asked Questions

Question: What type of memory does my motherboard support?

Answer: The motherboard supports ECC DDR4 UDIMM modules. To enhance memory

performance, do not mix memory modules of different speeds and sizes. Please follow all

memory installation instructions given in Chapter 2.

Question: How do I update my BIOS?

Answer: It is recommended that you do not upgrade your BIOS if you are not experiencing

any problems with your system. Updated BIOS files are located on our website at http://www.

supermicro.com. Please check our BIOS warning message and the information on how to

update your BIOS on our website. Select your motherboard model and download the BIOS

file to your computer. Also, check the current BIOS revision to make sure that it is newer

than your BIOS before downloading. You can choose from the zip file and the .exe file. If

you choose the zip BIOS file, please unzip the BIOS file onto a bootable USB device. Run

the batch file using the format FLASH.BAT filename.rom from your bootable USB device to

flash the BIOS. Then, your system will automatically reboot.

Warning: Do not shut down or reset the system while updating the BIOS to prevent possible

system boot failure!)

Note: The SPI BIOS chip used on this motherboard cannot be removed. Send your

motherboard back to our RMA Department at Supermicro for repair. For BIOS Recov-

ery instructions, please refer to the AMI BIOS Recovery Instructions posted at http://

X11SSL 데이터시트(PDF) 70 Page - List of Unclassifed Manufacturers