| 전자부품 데이터시트 검색엔진 |
|
STM32WB35CCU6ATR 데이터시트(PDF) 120 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STM32WB35CCU6ATR 데이터시트(HTML) 120 Page - STMicroelectronics |
|
120 / 193 page ![]() Electrical characteristics STM32WB55xx STM32WB35xx 120/193 DS11929 Rev 10 Note: For information about oscillator trimming refer to AN5165 “Development of RF hardware using STM32WB microcontrollers”, available from www.st.com. Low-speed external user clock generated from an external source The low-speed external (LSE) clock can be supplied with a 32.768 kHz crystal resonator oscillator. The information provided in this section is based on design simulation results obtained with typical external components specified in Table 57. In the application, the resonator and the load capacitors have to be placed as close as possible to the oscillator pins to minimize output distortion and startup stabilization time. Refer to the crystal resonator manufacturer for more details on the resonator characteristics (frequency, package, accuracy). Table 56. HSE oscillator characteristics Symbol Parameter Conditions Min Typ Max Unit tSUA(HSE) Startup time for 80% amplitude stabilization V DDRF stabilized, XOTUNE=000000, -40 to +125 °C range - 1000 - µs tSUR(HSE) Startup time for XOREADY signal -250 - IDDRF(HSE) HSE current consumption HSEGMC=000, XOTUNE=000000 - 50 - µA XOTg(HSE) XOTUNE granularity Capacitor bank -1 5 ppm XOTfp(HSE) XOTUNE frequency pulling ±20 ±40 - XOTnb(HSE) XOTUNE number of tuning bits - 0 - bit XOTst(HSE) XOTUNE setting time - - 0.1 ms Table 57. Low-speed external user clock characteristics(1) Symbol Parameter Conditions Min Typ Max Unit IDD(LSE) LSE current consumption LSEDRV[1:0] = 00 Low drive capability -250 - nA LSEDRV[1:0] = 01 Medium low drive capability -315 - LSEDRV[1:0] = 10 Medium high drive capability -500 - LSEDRV[1:0] = 11 High drive capability -630 - Gmcritmax Maximum critical crystal gm LSEDRV[1:0] = 00 Low drive capability - - 0.50 µA/V LSEDRV[1:0] = 01 Medium low drive capability - - 0.75 LSEDRV[1:0] = 10 Medium high drive capability - - 1.70 LSEDRV[1:0] = 11 High drive capability - - 2.70 tSU(LSE)(2) Startup time VDD stabilized - 2 - s |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |