 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
STW8019A 데이터시트(PDF) 17 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
STW8019A 데이터시트(HTML) 17 Page - STMicroelectronics |
|
|
17 / 55 page  STw8009/STw8019 Functional description 17/55 Transition from Active mode to Sleep mode In Sleep mode, DENC is not powered on. When Suspend signal changes from « 0 » to « 1 », the device goes from Active to Sleep mode and an internal Reset signal is generated by the Control Power Unit management to the DENC part. This signal has a 6 pixclk duration (pixclk = 27 MHz). Transition between Standby and Active modes Transitions between these two modes are applied by software configuration through I2C interface. Supply management At power up, supplies must be applied according to the following sequence: VddIO1, VddIO2 (1.8 V) then, Vdd (1.2 V) then, VccA1, VccA2, VccA3, VccA4 (2.8 /3.3 V) and removed according to the following sequence: VccA1, VccA2, VccA3, VccA4 (2.8 /3.3 V) then, Vdd (1.2 V) then, VddIO1, VddIO2 (1.8 V) 4.13 JTAG interface To ease the integration of STw8009/STw8019 in its system application, a JTAG interface is available. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
