STW8019BS3 datasheet(39/55 Pages) STMICROELECTRONICS

39 / 55 page

STw8009/STw8019

Control registers

39/55

If main_chr_del_en = 0 then the delays used are:

main_chr_del[3:0] = 0010 when mode = PAL/NTSC in 4:2:2 format on CVBS.

main_chr_del[3:0] = 0001 when mode = PAL/NTSC in 4:4:4

main_chr_del_en: Enable of luma to chroma delay on the 4:4:4 component outputs.

(*) 0 = disabled (DENC automatically sets this delay)

1 = enabled (chroma to luma delay is programmed by main_chr_del[3:0] bits (Reg

108).

Note:

This delay affects only the component Y/C. The cvbs output remains unaffected. Refer to

Table 19.

main_chr_del[3:0]

main_

chr_ del3

main_

chr_ del2

main_

chr_ del1

main_

chr_ del0

Delay on chroma path with reference to luma

path encoding [One pixel corresponds to

/fpix_clk]

(*)

0010

- 0.5 pixel delay on chroma

0011

- 1 pixel delay on chroma

0100

- 1.5 pixel delay on chroma

0101

- 2 pixel delay on chroma

1100

+ 2.5 pixel delay on chroma

1101

+ 2 pixel delay on chroma

1110

+ 1.5 pixel delay on chroma

1111

+ 1 pixel delay on chroma

Others

0 pixel delay on chroma (reference delay)

Others

+ 0.5 pixel delay on chroma

Chroma Delay Enable

Address: 0x006D

Type: R/W

content

main_chr

_del_en

default

[0]

STW8019BS3 데이터시트(PDF) 39 Page - STMicroelectronics

STW8019BS3 데이터시트(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55

데이터시트 다운로드

링크 URL