 |
전자부품 데이터시트 검색엔진 |
|
|
전자부품 데이터시트 검색엔진 |
|
ECE1200 데이터시트(PDF) 34 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
ECE1200 데이터시트(HTML) 34 Page - Microchip Technology |
|
|
34 / 87 page  ECE1200 DS00003093C Draft-page 34 2018-2021 Microchip Technology Inc. 6.3.1 REGISTER INTERFACE ENABLE / DISABLE The Configuration Port is disabled by default and must be enabled by placing the device into CONFIG MODE. This is done by writing the value 55h into the INDEX location. Any Reset event to the device, including PLTRST#, will again disable the interface, requiring it to be re-enabled by this method. The Configuration Port can also be disabled explicitly by writing the value AAh to the INDEX location. Register accesses will be disabled until the value 55h is again written to the INDEX location. The Configuration Port still claims I/O transfers even while disabled, so the Disabled state does not cause these transfers to be propagated to LPC. FIGURE 6-1: BLOCK DIAGRAM OF REGISTER SET Logical Device 0 Registers Global Registers Logical Device 1 Registers Index = 00h – 2Fh Index = 30h – FFh |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |
Korean ▼
English
Chinese
German
Japanese
Russian
Korean
Spanish
French
Italian
Portuguese
Polish
Vietnamese
Indian
Mexican
British
New Zealand
