| 전자부품 데이터시트 검색엔진 |
|
AT25SL321 데이터시트(PDF) 21 Page - Dialog Semiconductor |
|
|
|||||||||||||||||||||||||||||
AT25SL321 데이터시트(HTML) 21 Page - Dialog Semiconductor |
|
21 / 82 page ![]() 20 AT25SL321 DS-25SL321–112H–2020-10 8.4 Write Disable (04h) The Write Disable instruction is used to reset the Write Enable Latch (WEL) bit in the Status Register. To enter the Write Disable instruction, assert CS low prior to driving the instruction 04h onto the SI on the rising edge of SCK, and then driving CS high to terminate the operation. The WEL bit is automatically reset write- disable status of “0” after Power-up and upon completion of the every Program, Erase and Write Status Register instructions. Figure 8-3. Write Disable Instruction for SPI Mode (left) and QPI Mode (right) |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |