GLS50 Series, GLS50-M Series Installation & Operating Instructions

GLS52, GLS53, GLS54, GLS55, GLS58, GLS52-M, GLS53-M, GLS54-M, GLS55-M, and GLS58-M are commercial designations of model numbers LPS52, LPS53, LPS54, LPS55, LPS58, LPS52-M, LPS53-M, LPS54-M, LPS55-M, and LPS58-M respectively.

While every precaution has been taken to ensure accuracy and completeness in this manual, EGS Electrical Group, LLC. assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any errors or omissions.

The SolaHD and Emerson logos are registered in the U.S. Patent and Trademark Office. All other product or service names are the property of their registered owners. ©2009 EGS Electrical Group, LLC. All rights reserved. Specifications subject to change without notice.

Mechanical Outline & Dimensions

Mounting Hole

.16 [4.0] 4 X

3.73

[94.7]

4.00

[101.6]

.16

[4.0]

Earth

GND

3

F1

1

M1

~

~

T2

6

1

Output Voltage

Adjust Pot

M2

SK1

SK2

Top View

Side View

All dimensions are in inches [mm].

Maximum screw head diameter is .22″ [5.6 mm].

Mounting holes M1 and M2 should be grounded for EMI

purposes. Mounting hole M1 is an earth ground connection.

CAUTION! Do not accidentally connect the ac connector to

the dc output.