GLS53 datasheet(30/109 Pages) EMERSON-NETWORKPOWER

30 / 109 page

GLS120 Series Specifications

Input

Input range

85-264 Vac; 127-300 Vdc

Frequency

47-440 Hz

Inrush current

40 A max., cold start @ 25°C

Efficiency

80% typical at full load

EMI/RFI

FCC Class B conducted; CISPR 22 Class B conducted;

EN55022 Class B conducted; VDE 0878 PT3 Class B conducted

Power factor

0.99 typical

Safety ground

leakage current

<0.5 mA @ 50/60 Hz, 264 Vac input

Output

Maximum power

80 W for convection; 130 W with 30 CFM forced air

Adjustment range

±5% min. on the main outputs

Fan output

12 V @ 500 mA - 5%, +7%

Standby outputs

5 V @ 500 mA ± 5%

Hold-up time

20 ms @ 125 W load, 120 Vac input

Overload protection

Short circuit protection on all outputs

Case overload protected @ 120 -135% above rating

Overvoltage protection

20% to 35% above nominal output

Logic Control

Power failure

TTL logic signal goes high 100-500 msec after main output. It goes low at least 4 msec before loss of regulation.

Remote inhibit

Requires a contact closure to disable the outputs, except 5 V standby.

Remote sense

Compensates for 0.5 V lead drop min. Will operate without remote sense connected. Reverse connection protected.

Operating temperature

0° to 50°C ambient. Derate each output as 2.5% per degree from 50° to 70°C. -20°C start up

Storage temperature

-40°C to 85°C

Electromagnetic

susceptibility

Designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11 Level 3

Humidity

Operating; non-condensing 10% to 95% RH

Vibration

IEC68-2-6 to the levels of IEC721-3-2

MTBF demonstrated

>550,000 hours at full load and 25°C ambient conditions

Mating Connectors

(SK1) AC Input

Molex 09-50-8031; PINS: 08-52-0113

(SK2) DC Outputs

Molex 19141-0058/0063 Spade lug

(SK3)Control Signals Molex 90142-0010 (USA); PINS: 90119-2110 or

Amp: 87977-3; PINS: 87309-8

Connector Kit #70-841-020, includes all of the above

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±0.02” (±0.5mm).

3. Specifications are for convection rating at factory settings at 115 Vac input 25°C ,unless otherwise stated.

4. Mounting holes MH1, MH2 and MH3 should be grounded for EMI purposes.

5. Mounting MH1 is safety ground connection.

6. This power supply requires mounting on metal standoffs 0.20” (5m) in height.

7. Warranty: 2 year

8. Weight: 0.71 lb/0.32 kg

Phone: (800) 377-4384

Email: tech@solahd.com

www.solahd.com

Electrical Specifications

Environmental Specifications

GLS53 데이터시트(PDF) 30 Page - Emerson Network Power

GLS53 데이터시트(HTML) 30 Page - Emerson Network Power

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL