STM32F303X6 datasheet(40/124 Pages) STMICROELECTRONICS

부품명	STM32F303X6

상세설명	Arm® Cortex®-M4 32b MCUFPU, up to 64KB Flash, 16KB SRAM, 2 ADCs, 3 DACs, 3 comp., op-amp 2.0 - 3.6 V

PDF	124 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

40 / 124 page

Pinout and pin descriptions

STM32F303x6/x8

40/124

DS9866 Rev 8

PB8

I/O

FTf

TIM16_CH1,

TSC_SYNC,

I2C1_SCL,

USART3_RX,

CAN_RX,

TIM1_BKIN,EVENTO

PB9

I/O

FTf

TIM17_CH1,

I2C1_SDA, IR_OUT,

USART3_TX,

COMP2_OUT,

CAN_TX,

EVENTOUT

VSS

VDD

PC13, PC14 and PC15 are supplied through the power switch. Since the switch sinks only a limited amount of current (3 mA), the use of

GPIO PC13 to PC15 in output mode is limited:

- The speed should not exceed 2 MHz with a maximum load of 30 pF

- These GPIOs must not be used as current sources (e.g. to drive an LED).

After the first backup domain power-up, PC13, PC14 and PC15 operate as GPIOs. Their function then depends on the content of the Backup

registers which is not reset by the main reset. For details on how to manage these GPIOs, refer to the Battery backup domain and BKP

Fast ADC channel.

These GPIOs offer a reduced touch sensing sensitivity. It is thus recommended to use them as sampling capacitor I/O.

Table 13. STM32F303x6/8 pin definitions (continued)

Pin Number

Pin name

(function after

reset)

Pin functions

Alternate

functions

Additional functions

STM32F303X6 데이터시트(PDF) 40 Page - STMicroelectronics

STM32F303X6 데이터시트(HTML) 40 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL