| 전자부품 데이터시트 검색엔진 |
|
MIC5212 데이터시트(PDF) 3 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MIC5212 데이터시트(HTML) 3 Page - Microchip Technology |
|
3 / 18 page ![]() 2017 - 2022 Microchip Technology Inc. and its subsidiaries DS20005774B-page 3 MIC5212 1.0 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings † Supply Input Voltage, (VIN A or B)............................................................................................................... –20V to +20V Power Dissipation ................................................................................................................................. Internally Limited Operating Ratings †† Supply Input Voltage, (VIN ) ....................................................................................................................... +2.5V to +16V † Notice: Exceeding the absolute maximum rating may damage the device. †† Notice: The device is not guaranteed to function outside its operating rating. DC CHARACTERISTICS Electrical Characteristics: Unless otherwise indicated, Regulator A and B VIN = VOUT + 1V; IL = 100 μA; CL = 4.7 μF; TJ = +25°C, bold values indicate –40°C ≤ TJ ≤ +125°C. Parameters Symbol Min. Typ. Max. Units Conditions Output Voltage Accuracy VO –1 — 1 % Variation from specified VOUT –2 — 2 % Output Voltage Temperature Coefficient ΔVO/ΔT — 40 — ppm/°C Note 1 Line Regulation ΔVO/VO — 0.009 0.05 %/V VIN = VOUT + 1V to 16V — — 0.1 %/V Load Regulation ΔVO/VO — 0.05 0.7 % IL = 0.1 mA to 500 mA, Note 2 — — 1 % Dropout Voltage, Note 3 (per regulator) VIN – VO — 175 275 mV IL = 150 mA — — 350 mV — 350 500 mV IL = 150 mA — — 600 mV Ground Pin Current, Note 4 (per regulator) IGND — 1.5 2.5 mA IL = 150 mA — — 3.0 mA — 12 20 mA IL = 150 mA — — 25 mA Ripple Rejection PSRR — 75 — dB f = 120 Hz, IL = 150 mA Current Limit ILIMIT — 750 1000 mA VOUT = 0V Spectral Noise Density — — 500 — nV/√Hz VOUT = 2.5V, IOUT = 50 mA, COUT = 2.2 μF Note 1: Output voltage temperature coefficient is defined as the worst case voltage change divided by the total temperature range. 2: Regulation is measured at constant junction temperature using low duty cycle pulse testing. Parts are tested for load regulation in the load range from 0.1 mA to 500 mA. Changes in output voltage due to heating effects are covered by the thermal regulation specification. 3: Dropout voltage is defined as the input to output differential at which the output voltage drops 2% below its nominal value measured at 1V differential. 4: Ground pin current is the regulator quiescent current plus pass transistor base current. The total current drawn from the supply is the sum of the load current plus the ground pin current. |
|
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |