AD9161BBCZ datasheet(106/144 Pages) AD

106 / 144 page

AD9161/AD9162

Data Sheet

Rev. D | Page 106 of 144

Hex.

Addr. Name

Bits Bit Name

Settings

Description

Reset

Access

SPI_PLL_LOCK_RB

If set, the SERDES synthesizer

locked.

0x0

0 PLL is not locked.

1 PLL is locked.

0x289 REF_CLK_DIVIDER_LDO

[7:2] RESERVED

Reserved.

0x0

[1:0] SERDES_PLL_DIV_FACTOR

SERDES PLL reference clock

division factor. This field

controls the division of the

SERDES PLL reference clock

before it is fed into the SERDES

PLL PFD. It must be set so that

fREF/DivFactor is between 35

MHz and 80 MHz.

0x0

R/W

00 Divide by 4 for lane rate

between 6 Gbps and 12.5 Gbps.

01 Divide by 2 for lane rate

between 3 Gbps and 6 Gbps.

10 Divide by 1 for lane rate

between 1.5 Gbps and 3 Gbps.

0x2A7 TERM_BLK1_CTRLREG0

[7:1] RESERVED

Reserved.

0x0

SPI_I_TUNE_R_CAL_TERMBLK1

Rising edge of this bit starts a

termination calibration routine.

0x0

R/W

0x2A8 TERM_BLK1_CTRLREG1

[7:0] SPI_I_SERIALIZER_RTRIM_TERMBLK1

SPI override for termination

value for PHY 0, PHY 1, PHY 6,

and PHY 7. Value options are as

follows:

0x0

R/W

XXX0XXXX Automatically calibrate

termination value.

XXX1000X Force 000 as termination value.

XXX1001X Force 001 as termination value.

XXX1010X Force 010 as termination value.

XXX1011X Force 011 as termination value.

XXX1100X Force 100 as termination value.

XXX1101X Force 101 as termination value.

XXX1110X Force 110 as termination value.

XXX1111X Force 111 as termination value.

XXX1000X Force 000 as termination value.

0x2AC TERM_BLK1_RD_REG0

[7:4] RESERVED

Reserved.

0x0

[3:0] SPI_O_RCAL_CODE_TERMBLK1

Readback of calibration code

for PHY 0, PHY 1, PHY 6, and

PHY 7.

0x0

0x2AE TERM_BLK2_CTRLREG0

[7:1] RESERVED

Reserved.

0x0

SPI_I_TUNE_R_CAL_TERMBLK2

Rising edge of this bit starts a

termination calibration routine.

0x0

R/W

0x2AF TERM_BLK2_CTRLREG1

[7:0] SPI_I_SERIALIZER_RTRIM_TERMBLK2

SPI override for termination

value for PHY 2, PHY 3, PHY 4,

and PHY 5. Value options are as

follows:

0x0

R/W

XXX0XXXX Automatically calibrate

termination value.

XXX1000X Force 000 as termination value.

XXX1001X Force 001 as termination value.

XXX1010X Force 010 as termination value.

XXX1011X Force 011 as termination value.

XXX1100X Force 100 as termination value.

XXX1101X Force 101 as termination value.

XXX1110X Force 110 as termination value.

XXX1111X Force 111 as termination value.

AD9161BBCZ 데이터시트(PDF) 106 Page - Analog Devices

AD9161BBCZ 데이터시트(HTML) 106 Page - Analog Devices

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL