info@magigoo.com

www.magigoo.com

MAGIGOO

Thought3D Ltd, Unit2150, KBIC, Kordin Industrial Estate

Paola, PLA3000, Malta

Description:

MAGIGOO® - Polypropylene, is an all-in-one 3D printing, first layer adhesive that

offers a strong adhesion platform for polypropylene based filaments. Magigoo is an

easy to use 3D printing adhesive designed to reduce warping in FDM/FFF 3D printers.

Warping, among other factors, is caused by the differential cooling of a print during a

3D printing process. For printing repeatability and reliability a sure adhesion method

such as Magigoo - Polypropylene is needed.

Technical specifications:

Properties:

Magigoo – Polypropylene, acts as a thermally activated interfacial layer,

allowing for better interactions, both at the micro and molecular level,

between the printing bed and the printing materials. It is generally

recommended to print according to the printing temperatures recommended

by the filament supplier. The printing conditions vary between one printer and

another.

To find the best temperature one could start from the lower end of the

recommended settings and increase the bed temperature in 5 °C increments.

This should be done with standardised calibration prints.

Additionally Magigoo – Polypropylene, is temperature sensitive, in that it will

reduce its adhesive properties upon cooling. Different printers, print surfaces

or filaments will have slightly different release conditions.

Intended use:

To be used on FDM/FFF 3D printers with a heated bed on glass surfaces. Also works

when applied on sheets e.g. Kapton, PEI and similar. To be used with Polypropylene

plastics.

1