IPS1025H datasheet(16/32 Pages) STMICROELECTRONICS

부품명	IPS1025H

상세설명	High efficiency, high-side switch with extended diagnostics and smart driving for capacitive loads

PDF	32 Pages

Scroll/Zoom	100%

제조업체	STMICROELECTRONICS [STMicroelectronics]

홈페이지	http://www.st.com

Logo

16 / 32 page

7.5

GND disconnection protection

GND disconnection is the disconnection of the module from the reference line. When this condition occurs, the

output channel is turned off regardless of the input status.

When this event occurs, the IC continues working normally until the voltage between VCC and GND pins of the IC

results ≥ VUVOFF. The voltage on the GND pin of the IC rises up to the supply rail voltage level. In case of a GND

disconnection event, a current (ILGND) flows through OUT pin.

For an inductive load, if the GND is disconnected while the output channel is active, the current flows through the

power, which is activated by an active clamp as if the input had been deactivated.

Figure 10. Ground disconnection

OUT

VCC

PGND

SUPPLY RAIL

GROUND PLANE

APPLICATION BOARD

RLOAD

VCC

IPS1025H, IPS1025H-32, IPS1025HQ, IPS1025HQ-32

GND disconnection protection

DS13780 - Rev 3

page 16/32

IPS1025H 데이터시트(PDF) 16 Page - STMicroelectronics