| 전자부품 데이터시트 검색엔진 |
|
AP-K2N 데이터시트(PDF) 6 Page - JST Mfg. Co., Ltd. |
|
|
|||||||||||||||||||||||||||||
AP-K2N 데이터시트(HTML) 6 Page - JST Mfg. Co., Ltd. |
|
6 / 37 page ![]() 6 H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation Manual.doc 3. PREPARING FOR OPERATION 3.1 Mounting the Reel Hanger Due to packing considerations, when you receive the machine the reel hanger is not mounted on the machine. Assemble the reel hanger then mount it on the machine as illustrated below. 3.2 Mounting the applicator (All types) Step 1 Loosen bolts A & B with a 5mm hexagon wrench supplied with the tool-kit. Step 2 Remove the protective rubber collar from under the dials on the applicator ram. Step 3 Place the applicator on the base-plate of the crimping machine. Pull up the applicator ram whilst simultan- eously pushing the feed lever in the direction of the arrow shown in the photograph below, so that the collar on the shank slides into the groove on the press ram. Then push the applicator fully back into the press. CAUTION ENSURE THAT THE SHANK IS CORRECTLY LOCATED IN THE RAM. THERE IS A DANGER OF MAJOR TOOLING DAMAGE IF THE TOOLING IS NOT LOCATED CORRECTLY (AS IN THE PHOTOGRAPH BELOW). Step 4 Securely fasten the clamps with the 5 mm hexagon key, and visually check that the tooling is mounted correctly. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |