| 전자부품 데이터시트 검색엔진 |
|
AP-K2N 데이터시트(PDF) 8 Page - JST Mfg. Co., Ltd. |
|
|
|||||||||||||||||||||||||||||
AP-K2N 데이터시트(HTML) 8 Page - JST Mfg. Co., Ltd. |
|
8 / 37 page ![]() 8 H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation Manual.doc Illustration of Terminal reels mounted on the AP-K2N Crimping Machine MK-L MKS-L 3.4 Mounting the safety guard For reasons of safety and to comply with legislation, safety guards must always be mounted to the crimping machine. The above photographs illustrate the AP-K2N crimping machine with the safety guards fitted. The following photographs illustrate the different types of guards available for the range of JST applicators. WARNING AN AUTHORISED COMPETENT PERSON MUST ONLY CARRY OUT THE FOLLOWING OPERATIONS. When using the MK-L Applicator. Step 1 Secure the fabricated steel guard (JST UK-7), onto the Applicator using the cap head socket screws supplied. Step 2 Secure the die guard (JST UK-1), onto the applicator using the cap head socket screws supplied. Step 3 Select the appropriate side guard (JST UK-4), and mount onto the side guard support bracket (JST UK-9), using the countersunk screws supplied. Step 4 Remove the two upper motor fixing screws and clamp the side guard support bracket onto the press utilising these screws. Step 5 Adjust the side guard support to achieve the best relationship between guard and applicator. |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |