If you plug them to an outlet, you should be able to control the remote controlled outlets

with your remote control.

Installing the RC Switch Library

The RC Switch library provides an easy way of using your ESP8266, ESP32, or

Arduino to operate remote radio controlled devices. This will most likely work with all

popular low-cost power outlet sockets.

1. Click here to download the RC Switch library. You should have a .zip folder in

your Downloads folder

2. Unzip the .zip folder and you should get rc-switch-master folder

3. Rename your folder from rc-switch-master to rc_switch

4. Move the rc_switch folder to your Arduino IDE installation libraries folder

5. Then, re-open your Arduino IDE

Opening the Decoder Sketch

You need to decode the signals that your remote control sends, so that the Arduino or

ESP8266 can reproduce those signals and ultimately control the outlets.

The library comes with several sketch examples. Within the Arduino IDE software, you

need to go to File > Examples > RC_Switch > ReceiveDemo_Advanced. This next

sketch opens:

/*

Example for receiving

https://github.com/sui77/rc-switch/

If you want to visualize a telegram copy the raw data and

paste it into http://test.sui.li/oszi/

*/

#include

RCSwitch mySwitch = RCSwitch();

void setup() {

Serial.begin(9600);

mySwitch.enableReceive(0);

// Receiver on interrupt 0 => that is pin #2

}

void loop() {

if (mySwitch.available()) {