STM32L010K8 datasheet(40/92 Pages) STMICROELECTRONICS

40 / 92 page

Electrical characteristics

STM32L010K8 STM32L010R8

40/92

DS12325 Rev 3

Table 13. Current characteristics

Symbol

Ratings

Max.

Unit

ΣIVDD(2)

Total current into sum of all VDD power lines (source)(1)

105

ΣIVSS(2)

Total current out of sum of all VSS ground lines (sink)(1)

105

ΣIVDDIO2

Total current into sum of all VDDIO2 power lines (source)

IVDD(PIN)

Maximum current into each VDD power pin (source)(1)

100

IVSS(PIN)

Maximum current out of each VSS ground pin (sink)(1)

100

IIO

Output current sunk by any I/O and control pin

Output current sourced by any I/O and control pin

-16

ΣIIO(PIN)

Total output current sunk by sum of all I/Os and control pins(2)

Total output current sourced by sum of all I/Os and control pins(2)

-90

IINJ(PIN)

Injected current on FT, RST and B pins

−5/+0(3)

Injected current on TC pin

±5(4)

ΣIINJ(PIN)

Total injected current (sum of all I/O and control pins)(5)

±25

1. All main power (VDD, VDDA) and ground (VSS, VSSA) pins must always be connected to the external power supply, in the

permitted range.

2. This current consumption must be correctly distributed over all I/Os and control pins. The total output current must not be

sunk/sourced between two consecutive power supply pins referring to high pin count LQFP packages.

3. Positive current injection is not possible on these I/Os. A negative injection is induced by VIN < VSS. IINJ(PIN) must never be

exceeded. Refer to Table 12 for maximum allowed input voltage values.

4. A positive injection is induced by VIN > VDD while a negative injection is induced by VIN < VSS. IINJ(PIN) must never be

exceeded. Refer to Table 12 for the maximum allowed input voltage values.

5. When several inputs are submitted to a current injection, the maximum ΣIINJ(PIN) is the absolute sum of the positive and

negative injected currents (instantaneous values).

Table 14. Thermal characteristics

Symbol

Ratings

Value

Unit

TSTG

Storage temperature range

–65 to +150

°C

Maximum junction temperature

150

°C

STM32L010K8 데이터시트(PDF) 40 Page - STMicroelectronics

STM32L010K8 데이터시트(HTML) 40 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92

데이터시트 다운로드

링크 URL