H7CC-R11 datasheet(61/66 Pages) OMRON

61 / 66 page

H7CC-

Safety Precautions for All H7CC Series (Common)

Be sure to read the precautions for all Counters.

Warning Indications

Meaning of Product Safety Symbols

Do not allow pieces of metal, wire clippings, or fine

metallic shavings or fillings from installation to enter

the product. Doing so may occasionally result in

electric shock, fire, or malfunction.

Minor injury due to explosion may occasionally occur.

Do not use the Counter where subject to flammable or

explosive gas.

Fire may occasionally occur. Tighten the terminal

screws to the rated torque.

H7CC terminals and

P3GA-11/P3G-08 socket terminals

: 6.55 to 7.97 lb-in (0.74 to 0.90 N·m)

P2CF Socket terminals: 4.4 lb-in (0.5 N·m)

Minor injury due to electric shock may occasionally

occur. Do not touch any of the terminals while power

is being supplied. Be sure to mount the terminal cover

after wiring.

The service life of the output relay varies considerably

according to its usage. Use the output relay within its

rated load and electrical life expectancy. If the output

relay is used beyond its life expectancy, its contacts

may become fused or there may be a risk of fire. Also,

be sure that the load current does not exceed the

rated load current and when using a heater, be sure to

use a thermal switch in the load circuit.

Minor electric shock, fire, or malfunction may

occasionally occur. Do not disassemble, modify, or

repair the Counter or touch internal components.

CAUTION

Indicates a potentially hazardous

situation which, if not avoided, may

result in minor or moderate injury or in

property damage.

Precautions for

Safe Use

Supplementary comments on what to do

or avoid doing, to use the product safely.

Precautions for

Correct Use

Supplementary comments on what to do

or avoid doing, to prevent failure to

operate, malfunction or undesirable

effect on product performance.

Caution against electric shock

Used to warn of the risk of electric shock under

specific conditions.

General prohibition

Indicates the instructions of unspecified

prohibited action

No disassembly

Use to indicate prohibition when there is a risk

of minor injury from electrical shock or other

source if the product is disassembled.

General instructions

Used for general mandatory action precautions

for which there is no specified symbol.

CAUTION

H7CC-R11 데이터시트(PDF) 61 Page - Omron Electronics LLC

H7CC-R11 데이터시트(HTML) 61 Page - Omron Electronics LLC

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66

데이터시트 다운로드

링크 URL