www.tracopower.com

Page 4 of 9

All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.

General Specifications

Temperature ranges

– Operating

TMPM 04 models:

–25°C to +60°C (no derating)

TMP 10 models:

–25°C to +50°C (no derating)

other models:

–25°C to +70°C (with derating)

– Storage (non-operating)

–40°C to +85°C

Power derating

3.3 %/K above +50°C to +65°C

5.0 %/K above +65°C to +70°C

(noderatingapprovedforTMPM04andTMP10models)

Over temperature protection

at 90°C (automatic recovery at 67°C)

Temperature coefficient

0.02 %/K

Humidity (non-condensing)

95 % rel. H max.

Altitude during operation

TMP 07 models:

5‘000 m max.

TMP 15(C) models:

2‘000 m max.

TMP 30(C) models:

2‘000 m max. (4‘000 m single output models)

TMP 60(C) models:

3‘000 m max.

TMPM 04 & TMPM 10 models:

5‘000 m max.

Switching frequency

100 kHz typ. fixed

Isolation voltage (60 sec.)

– Input/Output

3‘000 VAC

Isolation resistance

– Input/Output

100 MOhm (at 500 VDC)

Working voltage (rated)

250 VAC

Electromagnetic compatibility (EMC), Emissions

EN 61000-6-3

EN 61000-6-4

EN 61204-3: 2000, class A

EN 55011, EN 55032, FCC part 15: class B

Electromagnetic compatibility (EMC), Immunity

EN 61000-6-2: 2005

EN 61204-3: 2000, class A

– Electrostatic discharge ESD

EN 61000-4-2

8 kV / 4 kV, criteria B

– RF field susceptibility

EN 61000-4-3

10 V/m, criteria A

– Electrical fast transient / burst immunity input

EN 61000-4-4

±2 kV, criteria B

– Electrical fast transient / burst immunity output

EN 61000-4-4

±2 kV, criteria B

– Surge immunity line – neutral

EN 61000-4-5,

±1 kV, criteria B

– Surge immunity output

EN 61000-4-5

±0.5 kV, criteria B

– Immunity to conducted RF disturbances

EN 61000-4-6

10 V, criteria B

– Mains voltage dips and interruptions

EN 61000-4-11 30 % 10 ms, criteria B

60 % 100 ms, criteria C

95 % 5000 ms, criteria C

EMC test certificates

www.tracopower.com/overview/tmp

Protection class II

to IEC/EN 60536

Safety standards

– Information technology equipment

IEC/EN 60950-1, UL 60950-1

except TMP 10 models

: IEC/EN 62368-1, UL 62368-1

– Industrial control equipment

UL/cUL 508 (chassis mount single and symetric

dual output models only)

Safety approvals

– CB certificate for IEC 62368-1

www.tracopower.com/overview/tmp

– UL approvals for UL 62368-1

www.ul.com -> certifications -> File: e188913

– UL approval for UL 508 (chassis mount models only)

www.ul.com -> certifications -> File: e322109

Reliability /calculated MTBF

TMP 07, TMPM 04 & 10 models:

>330‘000 h

(MIL-HDBK-217F, at +25°C, ground benign)

TMP 10 models:

>300‘000 h

TMP 15 models:

>280‘000 h

TMP 30 models:

>250‘000 h

TMP 60 models:

>125‘000 h

Casing material

plastic resin + fiberglass (UL 94V-0 rated)

Environmental compliance

– Reach

www.tracopower.com/products/reach-declaration.pdf

– RoHS

RoHS directive 2011/65/EU

AC/DC Power Modules

TMP & TMPM Series

4 to 60 Watt