68HC705SP7 datasheet(145/230 Pages) NXP

부품명	68HC705SP7

상세설명	Low-Cost, HC05 Core MCU in 20-Pin Package (MC68HC705JJ7) or 28-Pin Package (MC68HC705JP7)

PDF	230 Pages

Scroll/Zoom	100%

제조업체	NXP [NXP Semiconductors]

홈페이지	http://www.nxp.com

Logo

145 / 230 page

Simple Serial Interface

SIOP Registers

MC68HC705JJ7/MC68HC705JP7 — Rev. 3.0

General Release Specification

Simple Serial Interface

9.4.3 SIOP Data Register (SDR)

The SIOP data register (SDR) is located at address $000C and serves

as both the transmit and receive data register. Writing to this register will

initiate a message transmission if the node is in master mode. The SIOP

subsystem is not double buffered and any write to this register will

destroy the previous contents. The SDR can be read at any time.

However, if a transfer is in progress the results may be ambiguous.

Writing to the SDR while a transfer is in progress can cause invalid data

to be transmitted and/or received. Figure 9-6 shows the position of each

bit in the register. This register is not affected by reset.

$000C

Bit 7

654321

Bit 0

Read:

Bit 7

654321

Bit 0

Write:

Reset:

Unaffected by Reset

Figure 9-6. SIOP Data Register (SDR)

Freescale Semiconductor, Inc.

For More Information On This Product,

Go to: www.freescale.com

68HC705SP7 데이터시트(PDF) 145 Page - NXP Semiconductors