22

www.ittcannon.com

Dimensions shown in mm

Specifications and dimensions subject to change

The Snap Lock Environmental Series is environmentally-sealed

connector created for printed circuit board, blackbox, cable-to-cable,

or bulkhead applications.

When your under-the-hood requirements call for tough performance,

the SLE "snaps" into a tightly sealed connection that can withstand

heat, shock and vibration. The connector is designed to preserve the

integrity of the solid state package, while protecting against

contaminants - even when unmated.

Polarization, scoop-proofing and hand insertion of contacts are part

of the package. Gold, tin/lead-plated stamped contacts add

durability. A rugged, thermoplastic receptacle body maximizes

performance by withstanding temperature variances from -40°C to

+125°C.

The SLE series is available in both 19 and 28 contact cavity

configurations. It can also be adapted to robotic assembly. Should

your requirement demand higher density configurations, consult

Customer Service.

·

Superior environmental sealing

·

-40°C to +125°C continuous operation at rated

current

·

Available in two sizes, 19 and 28 contacts

·

Crimp stamped gold, tin/lead plated contacts

·

Hand insertable/removable contacts

·

Current rating 5 A and 13 A versions

·

Low millivolt drop

·

Small footprint on P.C. board and low profile

·

5-way alternate polarization

·

Integral mold latch. Adaptable to robotic

assembly.

·

Multi-direction, easily assembled endbells

·

Optional secondary bail latch

·

Latch with tactile and audible feedback

·

Low installed cost

·

Meets both signal and power requirements

·

Versatile cable strain relief, up, down, straight, left

ad right, flange/bulkhead

·

Connector mating assurance

Contact Resistance

Insulation Resistance

Current Rating

Dielectric Withstanding Voltage

Applicable Cannon Specification

Operating Temperature

Crimp Contacts

Wire Size

Wire Insulations Sealing Range

Polarization

Contact Insertion

Contact Extraction

Contact Retention

Wire Strip Length

10 m

Ω maximum

100 M

Ω minimum

5 A signal continuous at 125°C all contacts

13 A power continuous at 125°C all contacts

1000 Vrms AC at sea level

CS-189

-40°C to +125°C

Semi-automatic or hand crimpable

20-16 AWG

2,41 (.095) to 3,30 (.130) dia.

'D' shaped interface with five alternate positions.

No tool required. Suitable for automation.

Rear removable

25 lbs. Minimum per contact

5,59 (.220) to 5,33 (.210)

Connector Housing

Contacts

Finish

Environmental Seal

High temperature thermoplastic

Copper alloy

Engaging area: Gold over nickel

Crimp/P.C. tail area: Tin/lead over nickel

High temperature silicone elastomer

Snap-Lock Environmentally Sealed - Rectangular

Cannon SLE

Product Feature and Benefits

Performance Specifications

Materials and Finishes