31

www.ittcannon.com

Dimensions shown in mm

Specifications and dimensions subject to change

ABT-607 Pneumatic Crimper

ABT-500 UCCD

ABT-620 UCCS

The ABT-607 is a pneumatic powered and controlled

machine. It is designed for customers with moderate

volume. This machine is designed to semi-

automatically crimp stamped and formed contacts

onto pre-stripped stranded or single conductor

electrical wire. This machine will accommodate size

34 thru 12 AWG wire and is actuated by the use of a

foot pedal.

Machine Crimp Rate:

800 per hour

Power Requirements:

Pneumatic = 100 psi, 2 cu. ft. per min.

The ABT-500 Universal Cannon Crimp Die, is a

flywheel driven, electronically controlled machine that

is designed to semi-automatically crimp stamped and

formed contacts on stranded or single conductor, pre-

stripped wire. This machine will accommodate size

34 thru 12 WG wire. The machine is actuated by the

use of a foot pedal.

Machine Crimp Rate:

1300 per hour

Power Requirements:

Electrical = 115VAC, 60Hz, 20A

The ABT-620 Universal Cannon Crimper/Stripper is a

pneumatic powered, microprocessor controlled

machine. It is designed to semi-automatically strip

insulation from stranded or single conductor electrical

wire and attach a stamped and formed contact by

crimping. The machine will accommodate 34 thru 12

AWG wire. Primary application of the machine is the

termination of jacketed cable where the individual

leads cannot be stripped by fully automated

equipment. The ABT-620 UCCS operates

automatically upon insertion of a wire or it can be

switched over to foot pedal operation if desired.

Machine Crimp Rate:

1200+ per hour

Power Requirements:

Electrical = 115VAC, 60Hz, 20A

Pneumatic = 80 psi, 3 cu. ft. per min.

* For other geographical regions, contact Cannon for details.

Snap-Lock Environmentally Sealed - Rectangular

Lease Automatic Tooling - North America*

Cannon SLE