ST92F124 datasheet(279/429 Pages) STMICROELECTRONICS

279 / 429 page

279/429

I2C BUS INTERFACE

I2C BUS INTERFACE (Cont’d)

INTERRUPT STATUS REGISTER (I2CISR)

R248 - Read / Write

Reset Value: 1xxx xxxx (xxh)

Bit 7 = Reserved.

Must be kept at 1

Bits 6:4 = PRL[2:0] Interrupt/DMA Priority Bits.

The priority is encoded with these three bits. The

value of “0” has the highest priority, the value “7”

has no priority. After the setting of this priority lev-

el, the priorities between the different Interrupt/

DMA sources is hardware defined according with

the following scheme:

– Error condition Interrupt (If DMASTOP=1) (High-

est priority)

– Receiver DMA request

– Transmitter DMA request

– Error Condition Interrupt (If DMASTOP=0

– Data Received/Receiver End Of Block

– Peripheral Ready To Transmit/Transmitter End

Of Block (Lowest priority)

Bit 3 = Reserved.

Must be cleared.

Bit 2 = IERRP Error Condition pending bit

0: No error

1: Error event detected (if ITE=1)

Note: The Interrupt pending bits can be reset by

writing a “0” but is not possible to write a “1”. It is

mandatory to clear the interrupt source by writing a

“0” in the pending bit when executing the interrupt

service routine. When serving an interrupt routine,

the user should reset ONLY the pending bit related

to the served interrupt routine (and not reset the

other pending bits).

To detect the specific error condition that oc-

curred, the flag bits of the I2CSR1 and I2CSR2

Note: The IERRP pending bit is forced high when-

the error event flags are set (ADSL and SB flags in

the I2CSR1 register, SCLF, ADDTX, AF, STOPF,

ARLO and BERR flags in the I2CSR2 register). If

at least one flag is set, the application code should

not reset the IERRP bit.

Bit 1 = IRXP Data Received pending bit

0: No data received

1: data received (if ITE=1).

Bit 0 = ITXP Peripheral Ready To Transmit pend-

ing bit

0: Peripheral not ready to transmit

1: Peripheral ready to transmit a data byte (if

ITE=1).

PRL2 PRL1 PRL0

IERRP IRXP ITXP

ST92F124 데이터시트(PDF) 279 Page - STMicroelectronics

ST92F124 데이터시트(HTML) 279 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

데이터시트 다운로드

링크 URL