| 전자부품 데이터시트 검색엔진 |
|
TMD27721 데이터시트(PDF) 46 Page - OSRAM GmbH |
|
|
|||||||||||||||||||||||||||||
TMD27721 데이터시트(HTML) 46 Page - OSRAM GmbH |
|
46 / 60 page ![]() ams Datasheet Page 45 [v1-21] 2016-Feb-16 Document Feedback TMD2772/ TMD2772WA − Application Information Figure 50: Proximity Sensing Using Single Power Supply VBUS in the above figures refers to the I²C bus voltage which is either VDD or 1.8V. Be sure to apply the specified I²C bus voltage shown in the Available Options table for the specific device being used. The I²C signals and the Interrupt are open-drain outputs and require pull-up resistors. The pull-up resistor (RP) value is a function of the I²C bus speed, the I²C bus voltage, and the capacitive load. The ams EVM running at 400 kbps, uses 1.5kΩ resistors. A 10kΩ pull-up resistor (RPI) can be used for the interrupt line. 1µF VBUS RP RP RPI 1µF Voltage Regulator Per regulator datasheet 22 TMD2772 Or TMD2772WA VDD GND LDR INT SCL SDA LEDA LEDK |
|
링크 URL |
| ALLDATASHEET 가 귀하에 도움이 되셨나요? [ DONATE ] |
Alldatasheet는? | 광고문의 | 운영자에게 연락하기 | 개인정보취급방침 | 링크 투 데이터시트 | 링크교환 | 제조사별 검색 All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |