전자부품 데이터시트 검색엔진
  Korean  ▼
ALLDATASHEET.CO.KR

X  

LAN8804 데이터시트(PDF) 49 Page - Microchip Technology

부품명 LAN8804
상세설명  4-Port Gigabit Ethernet Transceiver with QSGMII Support
PDF  91 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
제조업체  MICROCHIP [Microchip Technology]
홈페이지  http://www.microchip.com
Logo MICROCHIP - Microchip Technology

LAN8804 데이터시트(HTML) 49 Page - Microchip Technology

Back Button LAN8804 Datasheet HTML 45Page - Microchip Technology LAN8804 Datasheet HTML 46Page - Microchip Technology LAN8804 Datasheet HTML 47Page - Microchip Technology LAN8804 Datasheet HTML 48Page - Microchip Technology LAN8804 Datasheet HTML 49Page - Microchip Technology LAN8804 Datasheet HTML 50Page - Microchip Technology LAN8804 Datasheet HTML 51Page - Microchip Technology LAN8804 Datasheet HTML 52Page - Microchip Technology LAN8804 Datasheet HTML 53Page - Microchip Technology Next Button
Zoom Inzoom in Zoom Outzoom out
 49 / 91 page
background image
LAN8804
© 2024 Microchip Technology Inc. and its subsidiaries
DS00003591G-page 49
5.16.2
GPIO INTERRUPTS
Each GPIO provides the ability to trigger a unique GPIO interrupt in the GPIO Interrupt Status Registers. Reading the
GPIO Interrupt Status Registers provides the current status of all GPIO interrupts. Each interrupt is enabled by setting
the corresponding bit in the GPIO Interrupt Enable Registers. The GPIO Controller aggregates the enabled interrupt
values into an internal signal that is sent to the main interrupt logic and is reflected via the GPIO Interrupt bit in the Chip-
level Interrupt Status register.
GPIO16
SOF2
PHYAD4
GPIO15
SOF0
PHYAD3
GPIO14
PORT3LED2
PHYAD2/
PORT3_LED2_POL
To enable LED operation with either a
pull-up or pull-down, LED Polarity
takes on the inverted value of the
configuration strap. Refer to Section
5.17, "LEDs" and Section 3.3.5, "LED
Polarity (PORT[3:0]_LED[2:1]_POL)"
for additional information.
GPIO13
PORT3LED1
PHYAD1/
PORT3_LED1_POL
GPIO12
PORT0LED2
PHYAD0/
PORT0_LED2_POL
GPIO11
PORT0LED1
LED_MODE/
PORT0_LED1_POL
GPIO10
GPIO9
GPIO8
GPIO7
GPIO6
MODE_SEL4
GPIO5
MODE_SEL3
GPIO4
MODE_SEL2
GPIO3
MODE_SEL1
GPIO2
GPIO1
MODE_SEL0
GPIO0
ALLPHYAD
Note:
The following must be considered when using GPIOs:
• Configuring a pin as a GPIO input automatically enables an internal pull-up.
• Internal pull-up resistors prevent unconnected inputs from floating. Do not rely on internal resistors to
drive signals external to the device. When connected to a load that must be pulled high, an external
resistor must be added.
• Configuring a pin as a GPIO output automatically disables the internal pull-up. Open-drain outputs
may require an external pull-up depending on the application.
TABLE 5-7:
GPIO ALTERNATE FUNCTIONS (CONTINUED)
GPIO
Alternate Function
Configuration Strap
Comments



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91


데이터시트 다운로드

Go To PDF Page


링크 URL



ALLDATASHEET 가 귀하에 도움이 되셨나요?  [ DONATE ] 

Alldatasheet는?   |   광고문의   |   운영자에게 연락하기   |   개인정보취급방침   |   링크 투 데이터시트    |   링크교환   |   제조사별 검색
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com